|
 |
|
| |
|
| Table
1 indicates standard used by HALCOR to produce brass
rods. |
|
Brass Extruded
and Drawn Products
Brass Rods Solid-Hollow
Brass rods (solid and hollow) are produced according to
DIN 17660, 176172, 1756, 1761, 1763, 1782, 59752, BS 2874
EN 12164, 12165, 12168 and ASTM specifications.
Manufacturing
Range |
 |
| Standard Alloys for Brass Rods |
| Alloy |
Chemical Composition % |
| Category |
DIN 17660
ISO 426 |
BS 2872
BS 2874 |
Halcor Alloy
No |
Cu |
Pb |
Zn |
Other Elements |
| l
lla
llb
lll
lV |
CuZn39Pb3
CuZn39Pb2
CuZn40Pb2
CuZn36Pb3
CuZn39Sn1 |
CZ121
CZ128
CZ122
-
CZ133 |
583
592/5920
582
603
600K |
57,5-58,3
58,5-59,5
58,5-58,8
59,5-60,5
59,5-61,0 |
2,7-3.2
2,0-2,2
1,8-2.3
2,7-3.2
max 0,20 |
Rest
Rest
Rest
Rest
Rest |
Sn:0,5-1
|
|
| |
|
|
| Similar alloys can be produced
by special arrangement, for example to ASTM |
| Alloy |
Chemical Composition % |
| ASTM |
Alloy |
Halcor Alloy
No |
Cu |
Pb |
Zn |
Other Elements |
| B16
B124
B453 |
C 360 00
C 377 00
C 345 00 |
6130
6020
6320 |
60-63
58-61
62-65 |
2,5-3,7
1,5-2,5
1,5-2,5 |
Rest
Rest
Rest |
Fe:0,35
Fe:0,35
Fe:0,35 |
|
|
Applications |
- Our product range of extruded and drawn
round, square, hexagonal and hollow brass
rods meets numerous industrial and other
technical applications
- Table 2 summarizes the main properties
and uses for brass rod alloys.
|
|
| |
|
|
| Special
alloys like Dezincification Resistant Brass (CuZn36Pb2As
per EN 12 164 or CZ132 per BS 2874) can also be supplied. |
| |
|
|
| |
|
|
|
| |
|
Main Properties of Brass Rod Alloys |
|
| Category |
Halcor
Alloy No |
Machinability
Index |
Characteristics and
Uses |
| l |
583 |
100 |
Very good machinability.
Suitable for limited hot stamping, especially
when further machining will follow. The basic
alloy for hollow bar production. |
| ll |
592/582/5920 |
80 |
Good
machinability. Very good hot stamping and forging
characteristics |
| lll |
603 |
60 |
Reduced machinablility.
Good performance in hot stamping and forging.
Suitable for limited cold forming (turning,
riveting, bending). |
| lV |
600K |
60 |
High corrosion resistance.Fair
degree of machinability. Suitable for hot stamping
and forging. |
|
| |
|
|
| All our copper & copper
alloys are treated (rolled, drawn, annealed, etc)
under the strictest quality control and are shipped
only after rigorous inspection. |
|
|
