STEEL PRODUCTS
 

Galvanised Wire

HEAVILY GALVANIZED WIRE in coils
For manufacturing of reinforced power cables
STEEL RAW MATERIAL QUALITY: Wire rod USD7 (according to DIN 17145)
DIAMETER: From Φ1.60 to Φ3.15mm
PACKAGING - WEIGHT: Coils, 100 to 900kg per coil

HEAVILY GALVANIZED WIRE in coils
For manufacturing of heavily galvanized mesh
STEEL RAW MATERIAL QUALITY: Wire rod SAE 1008 & SAE 1010 (according to ASTM A510M)
DIAMETER: From Φ2.00 to Φ3.90mm
PACKAGING - WEIGHT: Coils, 100 to 900kg per coil

HEAVILY GALVANIZED WIRE (for the production of armoured power cables- EN 10257-01)
DIAMETER
(mm)
DIAMETER TOLERANCES
according to
 EN 10218-02 class T1
(mm)
MINIMUM
 ZINC COATING (gr/m2)
according to
 EN 10244-02 class A
TENSILE STRENGTH
according to
 EN 10257-01
(N/mm2)
MAXIMUM RESISTANCE
according to EN 10257-01
(O/Km at 20? C)
1.60 -0.045 / +0.045 195 340-500 68.64
2.00 -0.050 / +0.050 215 340-500 43.93
2.50 -0.060 / +0.060 260 340-500 28.11
3.15 -0.070 / +0.070 255 340-500 17.71
 
HEAVILY GALVANIZED WIRE (for the production of heavily galvanized mesh)
DIAMETER
(mm)
DIAMETER TOLERANCES
(mm)
MINIMUM
 ZINC COATING
 (gr/m2) according to
 EN 10244-02 class A
TENSILE STRENGTH
(N/mm2)
2.00 -0.050 / +0.050 215 <515
2.50 -0.060 / +0.060 230 <500
3.00 -0.070 / +0.070 255 <500
3.90 -0.070 / +0.070 275 <500
 
COMMON SOFT GALVANIZED WIRE in coils
STEEL RAW MATERIAL QUALITY: Wire rod SAE 1006 & SAE 1008 (according to ASTM A510M)
DIAMETER: Φ1.50 to Φ4.90mm
PACKAGING - WEIGHT: Coils weighing 100 to 900kg per coil
     
COMMON SOFT GALVANIZED WIRE Analytical Matrices
DIAMETER
(mm)
DIAMETER TOLERANCES
according to
EN 10218-02 T2
(mm)
MAXIMUM ELLIPTICITY
according to
EN 10218-02 T2
(mm)
MINIMUM ZINC
COATING according
to EN 10244-02
(gr/m2)
TENSILE
STRENGTH
(N/mm2)
1,50 -0,045 / +0,045 0,0225 70 <515
1,60 -0,045 / +0,045 0,0225 70 <515
1,80 -0,050 / +0,050 0,0250 75 <515
1,90 -0,050 / +0,050 0,0250 80 <515
2,00 -0,050 / +0,050 0,0250 80 <515
2,20 -0,060 / +0,060 0,0300 80 <515
2,40 -0,060 / +0,060 0,0300 85 <515
2,70 -0,060 / +0,060 0,0300 95 <500
3,00 -0,070 / +0,070 0,0350 100 <500
3,40 -0,070 / +0,070 0,0350 105 <500
3,90 -0,070 / +0,070 0,0350 110 <500
4,50 -0,080 / +0,080 0,0400 110 <500
4,90 -0,080 / +0,080 0,0400 110 <500
 
SEMI-HARD GALVANIZED WIRE in coils
STEEL RAW MATERIAL QUALITY: Wire rod SAE 1008 & SAE 1010 (according to ASTM A510M)
DIAMETER: Φ1.50 to Φ4.50mm
PACKAGING - WEIGHT: Coils weighing 100 to 900kg per coil
 
SEMI-HARD GALVANIZED WIRE Analytical Matrices
DIAMETER
(mm)
DIAMETER
TOLERANCES
MINIMUM ZINC
COATING (gr/m2)
according to
EN 10244-02
TENSILE STRENGTH
(upon request)
(N/mm2)
1,80 -0,050 / +0,050 75 550-750
2,00 -0,050 / +0,050 80 550-750
2,20 -0,050 / +0,050 80 550-750
2,50 -0,050 / +0,050 85 550-750
3,00 -0,050 / +0,050 100 550-750
3,50 -0,150 / +0,050 100 550-750
4,00 -0,150 / +0,050 110 550-750
4,50 -0,150 / +0,050 110 550-750

Metal Agencies Ltd, Suite 4, Cobb House, 2-4 Oyster Lane, Byfleet , Surrey KT14 7DU • Tel +44 (0)1932 33 11 11 • Fax +44 (0)1932 33 11 90
Copyright © Metal Agencies Ltd 2012 • Design by Pipedream DesignSearch Engine Optimisation by a451